VinCar

Timer stopwatch for GPS and rally training. This app is the combination of countdown timer and stopwatch. In the left area, the default times are ready for input by tapping and set using the scroll wheel. On the right the times are stopped. Use the green button at the bottom left (START) to start and record the lap times (LAP). With the red button at the bottom right everything is stopped (STOP) and the stopwatch is reset (RESET).
The entire deviation from the target times is displayed in the upper bar. By swiping horizontally over the stopped times, the deviations of the individual laps are displayed.
After pressing RESET the default times can be changed. Unnecessary lines can be wiped away horizontally. Additional lines can be created by tapping TIMER. A maximum of 50 lines is possible.
The timer acoustically counts down the last 10 seconds. The volume can be changed on the cell phone.

New in version 2.0 is the context menu, which opens by long-pressing the "VinCar" label.
A new function is the entry of a start time from which the stopwatch starts. In the context menu you can activate the function with “Start Time on/off”. The time is synchronized via NTP to achieve the highest possible accuracy. If the function is activated, the start time appears at the top right and by touching it, a scroll wheel appears to set the start time. By touching the start time again, it is accepted and the timer is activated.
The scrolling behavior can also be changed using the new context menu. Scrolling continues automatically either by the timer or by the measured interim time. The blue bar above the first times shows what is active.
Lastly, operational safety was increased. When measuring is active, if you want to end the measurement early, the stop button must be unlocked via the context menu.