PeugeotDiagDTC

PeugeotDiagDTC is a car diagnostic application dedicated to Peugeot vehicles, which allows you to read and clear fault codes (DTCs) directly from your Android smartphone via an OBD2 Bluetooth adapter.

─────────────────────────────
MAIN FEATURES
─────────────────────────────

🔍 READING FAULT CODES
Read the DTCs stored in your Peugeot's electronic modules in seconds. The app displays the code, the description in Portuguese, and the status (permanent / intermittent). 🗑️ FAULT CLEARANCE
Clear fault codes quickly and safely after repair, with confirmation before executing the command.

📡 MULTIPLE MODULES SUPPORTED
Support for various vehicle systems, including:
• Engine (ECM)
• Gearbox (TCM / BSM)
• ABS / ESP
• Airbag (BSI)
• AED (Electric Power Steering)
• BSI (Board Intake Module)
• And many other CAN/KWP modules

🔗 COMPATIBILITY
• OBD2 Bluetooth adapters (ELM327 and compatible)
• KWP2000 and UDS protocols (ISO 14229)
• Compatible with Android multimedia units (Carlinkit, Android Auto, etc.)
• Android 5.0 (API 21) or higher

🌐 PORTUGUESE INTERFACE
Completely in Portuguese interface, with detailed descriptions of fault codes specific to Peugeot models.

─────────────────────────────
HOW TO USE
─────────────────────────────
1. Connect the OBD2 Bluetooth adapter to the diagnostic socket of your Peugeot (usually under the dashboard, driver's side)
2. Pair the adapter in the Android Bluetooth settings
3. Open PeugeotDiagDTC and select the adapter
4. Choose the module to Diagnose and tap on "Read DTCs"

─────────────────────────────
NOTES
─────────────────────────────
• This application is intended for diagnostic and informational purposes. The reading results depend on the OBD2 adapter used.

• Compatibility tested on Peugeot 3008/5008 MK2 models (KWP and UDS).

• Location permission is required by Android for Bluetooth device detection (operating system requirement, not for tracking).

Project developed by brand enthusiasts, with no connection to Stellantis/Peugeot.